:	Jun 14, 2004

.

Disconnect the battery ground cable.

.

Remove the C-pillar lower trim panel.

.

Remove the fuel filler interlock catch assembly.   Remove the clip.   Release the cable.   Disconnect the electrical connector.

.

Remove the solenoid.   Remove the 2 Torx screws.   Release the cable.

.

:   Do not disassemble further if the component is removed for access only. Release and remove the cable.   Release the clip.

.

Install the cable.   Secure the clip.

.

Install the solenoid.   Attach the cable.   Install the Torx screws.

.

Install the fuel filler flap latch assembly.   Connect and secure the electrical connector.   Carefully secure the clips.

.

Install the C-pillar lower trim panel.

.

Connect the battery ground cable.